Kota Stone

Kota Stone Cobbles

Hand-cut cobbles and setts in blue and brown Kota — square, rectangular and random, with the split faces left as the quarryman leaves them.

Hand-cut paving units

About Kota Stone Cobbles

We cut Kota cobbles in blue and brown. Those are the two colours we hold in cobble stock, and they are usually laid either as single-colour fields or mixed deliberately, which is where the material is at its best — the blue reads cool and the brown warm, and a mixed field has a depth that a single tone cannot reach.

Cobbles are cut by hand from offcut and shorter-bed material, which makes them both the most sustainable thing we produce and one of the most durable. Each piece has a naturally riven top face with real grip, so they hold up on ramps and slopes where a sawn slab would be a liability in the monsoon.

Standard units are 100×100 mm and 100×200 mm at 50–60 mm depth, but the hand-cutting means we can run almost any module you specify. For driveways we recommend 60 mm minimum on a compacted sub-base; for pedestrian paths and garden work 40–50 mm is sufficient.

Available finishes

Natural splitTumbledRock facedHand-dressed edges

At a glance

FamilyKota Stone

ColourBlue and brown

Thickness15 – 60 mm

Finishes4 available

Cut to sizeYes, to drawing

DispatchPan-India road & container

Where it works

Typical applications

Driveways
Garden paths and stepping stones
Ramps and slopes
Kerb and edging
Courtyard paving
Heritage and restoration work

Request a quote for Kota Stone Cobbles

Technical

Properties

Stone typeFine-grained calcareous limestone

ColoursGrey / blue-grey, green, brown & honey

Density2,400 – 2,600 kg/m³

Compressive strength1,800 – 2,200 kg/cm²

Modulus of rupture170 – 200 kg/cm²

Water absorptionUnder 0.40%

Mohs hardness3 – 4

Frost & weather resistanceExcellent — non-flaking, non-slippery when riven

Acid / alkali resistanceGood; avoid strong acids on polished faces

Sizes

Formats and thickness

Size (metric)	Size (imperial)	Thickness	Typical use
610 × 610 mm	2′ × 2′	20, 25, 30, 40 mm	General flooring, courtyards
610 × 305 mm	2′ × 1′	20, 25, 30 mm	Corridors, treads, borders
305 × 305 mm	1′ × 1′	18, 20, 25 mm	Bathrooms, small areas, cladding
914 × 610 mm	3′ × 2′	25, 30, 40 mm	Large-format interior floors
1220 × 610 mm	4′ × 2′	30, 40, 50 mm	Lobbies, plazas, feature floors
Random slabs	Bed-run lengths	25 – 60 mm	Paving, cladding, cut-to-size stock
Cut to size	Any module on drawing	15 – 60 mm	Treads, risers, sills, copings, counters
Cobbles & setts	100×100, 100×200 mm	40 – 60 mm	Driveways, paths, ramps